Hammer crusher used to crush a variety of hard and abrasive materials. The compressive strength of the material does not exceed 100MPa, moisture content of less than 15%. Broken materials for coal, salt, chalk, gypsum, brick, limestone and so on. Also used to break the fiber structure, strong resilient and tough broken wood, paper or broken asbestos cement waste to recover asbestos fibers and so on. It is one of the main equipment for crushing limestone, coal and other brittle materials with medium hardness in the metallurgical, building materials, chemical and hydropower industries. Its crushing ratio is high, its production capacity is high, and the product has uniform particle size.
Hammer Crusher Features:
With a compact, rational layout, easy installation, maintainability is good, easy to operate. In particular, the adaptability of the production process layout is excellent. Saving process layout space; has a special structural characteristics of the material that is broken, "big break than" and other characteristics.
1, hammer by the new technology, new technology casting, more wear-resistant, impact.
2, the particle size can be adjusted according to user needs.
3, the box structure is tight, to ensure that the broken production environment dust pollution.
4, the product structure is compact, beautiful appearance. Good wear resistance, easy maintenance.
Hammer crusher works:
Hammer crusher main working parts with a hammer (also known as hammer) rotor. The rotor consists of spindle, disc, pin and hammer. The motor drives the rotor to rotate at high speed in the crushing chamber. Materials from the upper feed port into the machine, the high-speed movement of the hammer blow, impact, shear, grinding and crushing. In the lower part of the rotor, a sieve plate is provided. Particles smaller than the sieve size in the crushed material are discharged through the sieve plate. The coarse particles larger than the sieve size remain in the sieve plate and continue to be struck and grinded by the hammer. Finally, Out of the machine.
category |
model |
Feeding size (mm) |
Discharge granularity (mm) |
Production capacity (m3 / h) |
Motor |
Total weight (t) |
Dimensions (L × W × H) (mm) |
|
Poles |
Power (kw) |
|||||||
Hammer crusher
|
PCΦ400×300 |
≤200 |
≤25 |
5-10 |
4 |
11 |
0.8 |
900×670×860 |
PCΦ600×400 |
≤250 |
≤30 |
10-22 |
4 |
22 |
2.26 |
1200×1050×1200 |
|
PCΦ800×600 |
≤250 |
≤35 |
18-40 |
4 |
55 |
4.8 |
1310×1180×1310 |
|
PCΦ1000×800 |
≤350 |
≤35 |
25-50 |
4 |
75 |
5.9 |
1600×1390×1575 |
|
PCΦ1000×1000 |
≤350 |
≤35 |
30-55 |
6 |
132 |
8 |
1800×1590×1775 |
|
PCΦ1250×1250 |
≤350 |
≤35 |
35-65 |
6 |
180 |
14 |
2060×1600×1890 |
|
PCΦ1400×1400 |
≤350 |
≤35 |
50-100 |
6 |
280 |
32 |
2365×1870×2220 |
|
PCΦ1600×1600 |
≤350 |
≤35 |
100-150 |
8 |
480 |
37.5 |
3050×2850×2800 |
Website:http://www.hnpinzhong.com